Skip to content
Editing Techniques8 min read

How Was This Made? How to Break Down an Edit, Cut by Cut

How was this made? is a question that keeps coming up under edits people want to learn from. An answer that names an app, a plugin or a preset identifies a tool; it does not explain the decisions between the shots. Those decisions sit at the cuts: what happens at each one, what connects the two shots, and what the cut changes.

This article is a way to answer it yourself — five passes over the clip — and two references from the ShotBook catalog broken down with it. For each one we used scene detection and frame-difference spikes to mark candidate edit points, checked the frames around every marked point by eye, and compared their timing with sound peaks measured in 20-millisecond windows. Times in the article are rounded to a tenth of a second.

The five passes

Pass 1. Watch once at full speed and write one line

Before you pause anything, write down in one line what the edit does to you: the fall never lands, the trip changes country mid-gesture. That line is the target. Every note you take later should explain it; a note that explains nothing in it is probably a detail you can skip.

Pass 2. Find every cut

Step through the clip frame by frame and write down the time of every cut. Count the shots and divide the length by their number: the average shot length tells you the pace before any effect does. Then look at how the shots are spread, because the average can hide the structure. You will find more cuts than you saw; the ones hidden inside movement are exactly the ones you miss at full speed.

Pass 3. Name what carries each cut

For each cut, compare the last frame before it with the first frame after it. Usually something connects the two:

  • Movement that continues in the same direction: a whip pan, a cut on action.
  • A shape or a pose in the same place in the frame: a match cut.
  • Something that sweeps across the frame and uncovers the next shot: masking, a wipe.
  • The same framing with time removed: a jump cut. A tighter version of the same shot: a punch-in.

Check that each cut is a cut: if the frame after it is the frame before it inverted, recoloured or rescaled, it is an effect inside one shot. Log those, and the techniques that happen without a cut, separately, with their start and end: a speed ramp inside one shot, an overlay, a split screen. If nothing connects two shots, it is a plain cut, and that is an answer too. Plain cuts still matter: they set the rhythm against which a designed transition stands out.

Pass 4. Listen

Play it again with sound and mark the cuts that land on a hit: a kick, a whoosh, a word. Not every edit is cut to the beat, and it helps to know which kind you are copying. Look in particular at where the designed cuts and effect changes from pass 3 fall. Neither clip below is cut strictly to the music. In both, some designed changes land close to a sound peak; not every key visual change does.

Pass 5. Write the recipe and collect references

Turn the notes into a shot list: what each shot shows, how long it runs, how it comes in and how it leaves. Then, for every technique on the list, find two or three more references before you try it. The same move in a different genre shows you which part is the technique and which part is just the footage.

Two edits broken down with the five passes

Both are in the ShotBook catalog under the names below. In brackets are the techniques visible at the edit points discussed here, not each card's full tag list. Neither shows a brand in the frame or the title.

1. *River to Snowy Peaks* (Match Cut, Masking, Split-Screen)

One line: a lazy afternoon by a river turns into a snow trip without anyone breaking stride. Edit points: about 13 seconds and 15 edit points (ten shot changes and five effect changes), roughly one per second on average, but the average hides everything. The first 6.3 seconds are one continuous shot: two friends on a riverside road, no cut at all. The edit points are concentrated in the remaining 6.6 seconds.

What carries the cuts: at about 6.3 s one of the friends swings his arm out toward the other, and the cut lands mid-gesture. The next shot opens on a man in a puffer jacket in a snow field, his arm out at the same height and in the same place in the frame, reaching toward his friend. It is a match cut on a gesture, and it is why the move from a palm-lined river to a snow field under mountains reads as one action. It also lands close to a sound peak. After it the edit speeds up: a smeared glitch frame at about 6.8 s, an inverted inset at 7.0 s, a composition of several windows at about 8.3–9.0 s (split screen), and at about 10.8 s five vertical panels that carry in the next shot (masking).

Recipe: hold one long shot to set a calm pace, break it on a gesture, land the gesture in a new place, then spend the energy you saved on a short burst of effects. What to steal is the order: patience first, then the match cut that releases it.

2. *Red-Eyed Descent* (Masking, Punch-In/Out, Overlay)

One line: a fall that never lands. Edit points: about 13 seconds and around 40 edit points, counting cuts and effect changes: roughly one change every third of a second. It is too dense to break down whole; take it in three excerpts, around 2–5 s, 6.3–6.8 s and 7.2–7.8 s.

What happens at the edit points: the clip uses black and white as its glue, and not every flip is a cut. At about 2.1 s a negative close-up of eyes turns positive, with red eyes. Put the two frames side by side and the second is the first one inverted: an effect inside one shot. At about 6.4 s a jumping figure, white on black, turns black on white in the same pose, again the same shot inverted, and at about 6.8 s it flips back as the framing changes, the figure now smaller and to the left. The flips at 6.4 and 6.8 s land close to a sound peak; the one at 2.1 s does not. Between about 3.0 and 3.5 s a tiny falling figure stays in the centre while a dark, streaked mass sweeps across the frame and turns the background from black to white and back (masking). At about 7.2 s three copies of the jumper share one frame (overlay), and from about 7.3 to 7.7 s five two-frame push-ins close in on a man on a rock until his blurred face fills the frame (punch-in).

Recipe: pick one visual rule (here: keep the image, invert the light) and repeat it until the viewer learns it, then break it with a fast punch-in run. The ending loops: at about 12.8 s the clip returns to the negative eyes it opened on.

What these two examples have in common

  • Not every change is a cut. In Red-Eyed Descent the flips at 2.1 and 6.4 s look like cuts at full speed; frame by frame, the image after is the image before, inverted. In River to Snowy Peaks the change at 6.3 s is a real cut between two places, held together by one gesture in the same part of the frame.
  • Sound reinforces selected changes, not every one. The gesture cut at 6.3 s and the flips at 6.4 and 6.8 s fall close to sound peaks; the eye flip at 2.1 s does not.

Mistakes this method helps you avoid

  • Naming the effect instead of the cut. "It's a glitch preset" doesn't tell you where the glitch sits or what it hides.
  • Copying the transition without the shots that set it up. A match cut on a gesture needs the gesture in both shots. The transition alone does not create the alignment: choose, shoot or reframe the shots so the gesture sits in a matching position.
  • Counting effects, not cuts. Do not assume the busiest passage holds the main decision. In River to Snowy Peaks the most important choice is the six seconds without a cut.
  • Studying one example. One clip shows you a technique tied to its footage. Two or three in different genres show you the technique.

Where to find edits worth breaking down

ShotBook is a catalog of video references for editors and filmmakers. References are organized and tagged by editing and shooting technique, so you can start from the move you want to learn — Match Cut, Masking, Punch-In/Out, Whip Pan — and get real edits that use it. Each transition also has its own page with a definition, how to spot the cut, and a set of cards from real edits; the match cut page is at shotbook.art/references/transitions/match-cut. Typing the name of a technique into the search field works as well.

You can filter by category, pacing, transitions, hook type, production level, orientation, and effects — useful for pass 5, when you need the same move in a different genre.

Final thought

"How was this made?" has a short answer and a long one. The short one is a list of techniques. The long one is where each of them sits and what it carries, and you only get it by going through the clip cut by cut.